Distribution Headers and Condensate Units

Distribution Headers and Condensate Units

Distribution valves and air header manifolds for air, gas and liquid applications where multiple outlets are required from one manifold in order to supply several lines. The Distribution header will have one main isolation valve at the inlet, with valves on each outlet port and a valve on the drain if required.

A variety of configurations are available from 4-way to 12-way outlets, inlet & drain sizes and end connections to your specifications. Pressure ratings, material & valve type manufactured according to your application or design requirements.

 

Air Headers

Air Headers

Typical Schematic of an Air Header Distribution Manifold

Distribution Pipe size 2"’ seamless Stainless steel 316 or 304
Header Inlet 1" Female Bsp or Npt threaded to ASME B16.1 or
Flanged inlet optional
Header Outlet/drain ¼" Male Bsp or Npt threaded to ASME B16.1 or
150# cast fitting
Outlet Ports From 4-way to 12-Way, ½" Male Bsp or Npt threaded
Valves for Outlets ½" Bar Stock valves, or ½”Needle valves
Pressure test Pressure test optional, NDT to your requirements
   

Lock-out / venting ball valves available as a safety feature in air header manifolds, venting any back pressure to the manifold

Vent in the bottom of the ball to allow venting of back pressure or downstream pressure to atmosphere for safety

 

condenstaion pots

Condensate Pots

Typical Schematic of a condensate pot

Distribution Pipe size 2”’ seamless Stainless steel 316 or 304
Header Inlet 1” Female Bsp or Npt threaded to ASME B16.1 or Flanged inlet optional
Header Outlet/drain None / or ¼”Male Bsp or Npt threaded to ASME B16.1 or 150# cast fitting
Outlet Ports 1-port or 2-port opposite or on alternate sides, ½” Male Bsp or Npt threaded
Pressure test Pressure test optional, NDT to your requirements